MEDICUBE AGE R Booster Pro — Dispositif Multifonction LED & Microcourant

The MEDICUBE Booster Pro is not a typical cosmetic treatment but a technological device combining six clinical modalities used for decades in Korean dermatology clinics.

Electroporation (Booster mode) : this technology creates temporary micro-channels in the epidermis through high-voltage electrical pulses. It increases skin permeability by up to 785%, allowing serums and ampoules to penetrate beyond the stratum corneum. Your niacinamide serum or your vitamin C thus become exponentially more effective.

Microcurrent (MC mode) : low-intensity electrical currents mimic the body's natural impulses to stimulate collagen production and smooth fine lines around the eyes, nasolabial folds, and lip corners. It contours facial relief without needles.

EMS – Electrical Muscle Stimulation (Derma Shot mode) : applies optimized medium frequencies for facial muscles, stimulating fibers that have lost tone. Targets sagging cheeks, under-eye bags, and reshapes the facial oval.

Electric needles (Air Shot mode) : a high-frequency thermal energy technology that creates micro-holes on the skin surface without direct contact. Acts on pore size and texture without mechanical irritation.

5-color LED therapy : blue (455-492nm) for sebum control, orange (597-622nm) for radiance, green (492-577nm) for plumping, red (622-780nm) for elasticity, violet (390-455nm) to boost absorption. Each color corresponds to a specific wavelength acting on particular skin chromophores.

☀️ Morning routine (10-15 minutes)

1. Cleansing : always start on clean, dry skin.
2. Air Shot Mode (blue light) : sweep the face 2-3 times a week on dry skin, from the center outward, without pressing. Gentle exfoliation without product (5 min).
3. Light serum application : apply your essence or watery serum (hyaluronic acid, niacinamide).
4. Booster Mode (orange light) : glide the device in circular motions to help active ingredients absorb. Apply a light serum first, then a thick cream or gel (5-10 min).
5. MC Mode (green light) : on targeted areas (jawline, cheekbones, eye contour), make upward movements with firm pressure. Use with the remaining cream (5-10 min).
6. Derma Shot Mode (red light) : hold 1-2 seconds on each muscle point (temples, forehead, chin) to firm (5-10 min).

🌙 Evening routine

1. Repeat the same sequence, but avoid using the Booster Pro with retinoids or active exfoliating acids — this can cause excessive sensitivity.

Pro tip : the AGE-R app lets you customize settings (intensity, LED color, timer) and track your progress with before/after photos.

This device is designed for several profiles:

• Mature skin (35+) looking to slow down skin sagging, improve firmness, and stimulate collagen production without injections.
• Advanced skincare enthusiasts who invest in high-end serums and want to maximize their effectiveness — electroporation literally transforms absorption.
• Dull or tired skin seeking an immediate "glass skin" effect: the Booster mode offers visible radiance from the first use.
• People concerned about enlarged pores or uneven texture — the Air Shot mode acts like gentle microneedling without actual needles.
• Those who lack time for salon treatments: this device replicates clinical technologies at home, at a much lower long-term cost.

Avoid if : you have a pacemaker, are pregnant, have metal implants in the face, or suffer from epilepsy. This device uses microcurrents; it is important to use it with caution..

Improvement in skin permeability by 785%, skin radiance +11.4% after 2 weeks, discoloration improved by 1.98% after 4 weeks, even skin tone +1.8% after 4 weeks, enhanced hydration +1.73% after 2 weeks.

Forehead volume +35.9% after 2 weeks, nasolabial folds -24.2%, glabellar lines (11) -16.1%, crow’s feet -12.6%, neck wrinkles -11.8%, skin density +5.46%.

Many users see visible results in as little as three weeks, with regular use 3 to 5 times per week. The lifting effect is noticeable immediately after a session, with skin appearing plumped, smoothed, and radiant.

Benefits accumulate: after 4 to 8 weeks of consistent use, expect refined skin texture, measurable reduction in fine lines, a redefined facial contour, and better tolerance to potentially irritating active ingredients (as they are better absorbed, requiring lower surface concentrations).

Do I need a special conductive gel to use the Booster Pro?

No, you can use it directly with your usual skincare products. Unlike other microcurrent devices, the Booster Pro does not require a thick gel — your serums and creams are enough. Just make sure to apply enough so the head glides easily.

Can I use all 4 modes in a single routine?

Yes, all four modes can be used in one routine. Start with Air Shot on clean, dry skin before applying your skincare, then use Booster, MC, and Derma Shot with your usual skincare. Allow 10-15 minutes in total.

Can the device be used around the eyes?

All four modes can be used around the eyes, favoring level 1 for delicate skin areas like the eye contour, nose, and mouth. Always start gently and gradually increase the intensity.

What is the difference from the previous Booster-H?

The Booster Pro offers superior skin permeability compared to the Booster-H, delivering active ingredients deeply for a more powerful radiance treatment. The device head is wider, and the central LED and vibrations enhance the effects.

The LED is too bright, even with eyes closed. Is this normal?

It may seem intense, but it is safe for the eyes. If it bothers you, you can disable the LED via the AGE-R app. However, avoid direct exposure if there is a lot of product on the head and the central LED activates without skin contact.

Can I use the Booster Pro every day?

Yes, but adjust the frequency to your skin type. Sensitive skin should start with 2-3 times per week. Normal to combination skin can tolerate daily use. Avoid using it the same evening as a strong retinol or chemical peel — this may overstimulate your skin.

MEDICUBE is a South Korean brand founded by Kim Byung-hoon, owned by the tech beauty company APR Corp. Since its launch in 2014, MEDICUBE develops and manufactures all its products in South Korea.

The engineering required more than three years of R&D under the direction of Dr. Shin, a biomedical expert who is the founder and research director of the company. All medicube devices are designed and manufactured in-house at their factory in Korea, using advanced technologies like RF, EMS, and EP to deliver professional results at home.

The brand gained recognition with the launch of its Red Line range (2016-2017), an acne-targeted skincare system using active ingredients like salicylic acid, niacinamide, and Centella asiaticaSince then, MEDICUBE has expanded its offering to high-tech devices — the AGE-R range was launched around 2021.

With $102.9 million in revenue on TikTok Shop and famous fans including Kylie Jenner and Hailey Bieber, APR Corp.'s stock surged 200% in 2025, surpassing a $4 billion valuationMEDICUBE embodies the K-beauty philosophy that views clinical treatments and home care as a continuum, not two separate worlds.

Discover the entire MEDICUBE range

The MEDICUBE AGE R Booster Pro is not a cosmetic product per se, but a medical electronic device. It therefore does not contain INCI ingredients in the traditional sense.

Technical composition : medical surgical steel (head), ABS resin (body), lithium-ion battery (power supply), Ni-Cr heating element (internal). The device head uses surgical steel, commonly used in medical devices such as scalpels and syringe needles. Although non-allergenic and rust-resistant, slight scratches may appear during manufacturing or cleaning — this is normal and does not affect functionality.

Built-in technologies : electroporation, microcurrent, EMS (electrical muscle stimulation), electric needles, 5-wavelength LED therapy (455-780nm), sonic vibrations. Equipped with a skin contact sensor that emits LED light only upon skin contact, for optimal safety.

Maintenance : clean the head after each use with a cotton pad soaked in micellar water or isopropyl alcohol. No replacement cartridges are needed after the initial purchase. Simply recharge via USB Type-C connection and continue using the device without additional costs..